AutoCalm Sound Deadening Materials Do They Really Work?

If you’re searching for methods to reduce the noise level in your vehicle from road and engine noises, chances are you’ve come across sound deadening materials like AutoCalm. But do they really work? In this article, we’ll explore what sound deadening materials are, how they work, and whether AutoCalm is a good option for your vehicle.

What are Sound Deadening Materials?

Sound deadening materials are products designed to reduce the noise level inside a car. They typically consist of heavy, dense materials that absorb sound waves and vibrations. The most common types of sound deadening materials used in vehicles include mass loaded vinyl (MLV), butyl rubber sheets, and closed-cell foam.

How Do Sound Deadening Materials Work?

Sound deadening materials work by reducing the amount of noise that enters the vehicle cabin. When sound waves hit the surface of a car, they bounce off and create vibrations. These vibrations then travel through the metal and plastic parts of the car, amplifying the noise level inside the cabin. Sound deadening materials absorb these vibrations, preventing them from propagating and reducing the overall noise level.

Pros

• Effective: AutoCalm has been proven to reduce the noise level in vehicles significantly.
• Easy to Install: AutoCalm comes with an adhesive backing, making installation a breeze.
• Heat Insulation: In addition to reducing noise, AutoCalm also provides heat insulation, keeping the interior of your vehicle cool in hot weather conditions.

Cons

• Cost: AutoCalm is not the cheapest option on the market, and installing it in your entire vehicle can quickly add up.
• Weight: AutoCalm is relatively heavy, which can affect your fuel efficiency and handling if not installed correctly.
• Limited Coverage: AutoCalm is designed to be applied to specific areas of your vehicle, such as the doors and floor. If you’re looking for a complete soundproofing solution, you may need to use additional materials.

Alternatives to AutoCalm Sound Deadening Materials

• Dynamat: A well-known brand in the automotive industry, Dynamat offers a range of sound deadening solutions.
• Noico: A budget-friendly alternative to AutoCalm, Noico is an effective option for reducing road noise in vehicles.
• Kilmat: Similar to Noico, Kilmat is a cost-effective option for soundproofing your car.

Step by Step Guide for Installing AutoCalm Sound Deadening Materials

1. Clean the Surface: Before applying AutoCalm, make sure to clean the surface of your vehicle with a degreaser to remove any dirt or oil.
2. Measure and Cut: Measure the area where you want to apply AutoCalm and cut the material to the appropriate size.
3. Peel and Stick: Remove the backing from the adhesive side of AutoCalm and stick it onto the surface of your vehicle. Press down firmly to ensure that it adheres properly.
4. Repeat: Continue to apply AutoCalm to all the desired areas of your vehicle, such as the doors and floor.

Tips for Installing AutoCalm Sound Deadening Materials

• Make sure to wear gloves while installing AutoCalm to prevent any injuries from sharp metal edges or adhesives.
• Use a roller tool to press down firmly on the material after application to ensure proper adhesion.
• Start with small sections and work your way up to larger areas to avoid air pockets and wrinkles.

Comparing AutoCalm to Other Sound Deadening Materials

When comparing AutoCalm to other sound deadening materials, several factors come into play, such as cost, effectiveness, and ease of installation. In terms of effectiveness, AutoCalm has been proven to reduce noise levels significantly, but it falls short when compared to higher-end brands like Dynamat. However, AutoCalm is relatively easy to install and comes with an adhesive backing, making installation a breeze. When it comes to cost, AutoCalm is not the cheapest option on the market but is still more affordable than premium brands like Hushmat.

FAQ

1. Will AutoCalm sound deadening material completely eliminate road noise in my car?

No, AutoCalm will not completely eliminate road noise in your vehicle but will significantly reduce it.

2. Can I install AutoCalm sound deadening material myself?

Yes, AutoCalm is designed to be easy to install and comes with an adhesive backing, making it a DIY project.

3. Will AutoCalm affect the weight and fuel efficiency of my vehicle?

Yes, AutoCalm is relatively heavy and can affect your fuel efficiency and handling if not installed correctly.

4. Is AutoCalm the best sound deadening material for my car?

AutoCalm is an effective option for reducing noise levelsin your vehicle, but it may not be the best option for everyone. Factors like cost, effectiveness, and installation difficulty should be considered when choosing a sound deadening material.

5. Can AutoCalm be removed from my car without causing damage?

Yes, AutoCalm can be removed from your vehicle without causing damage, but it may leave behind residue that needs to be cleaned up.

Conclusion

AutoCalm sound deadening materials are an effective solution for reducing the noise level in your vehicle from road and engine noises. They work by absorbing sound waves and vibrations, preventing them from propagating and amplifying inside the cabin. While AutoCalm is relatively easy to install and comes with an adhesive backing, it can be costly and heavy, affecting your fuel efficiency and handling if not installed correctly. When choosing a sound deadening material, consider factors like cost, effectiveness, and installation difficulty to find the best option for your vehicle.